Data sheet
Download vehicle data as a PDF
The data sheet is generated automatically from the current information on this vehicle page.
Product data: 22.09.2026
Conversion specification
Base vehicle: panel van, front-wheel drive, X250 platform, sliding door on the right, internal combustion engine (ICE)
Delivery code: 491463T01
The Kerstner chilled goods conversion for the Peugeot Boxer combines the highest insulation performance with consistent practicality – developed and manufactured for everyday use in food and chilled goods transport.
The conversion achieves a K coefficient of below 0.4 W/m²K and is classified as “heavily insulated” under ATP requirements. This is made possible by the seamless connection of all insulation elements – including at the sliding door – without gaps or thermal bridges.
The engine-driven refrigeration system reliably maintains the temperature range from 0 °C to +20°C throughout the journey.
The polyurethane insulation components are water-repellent, antibacterial and impact-resistant, and meet the requirements of the ATP and HACCP guidelines. The easy-to-clean surface reduces the effort required to maintain hygiene in day-to-day operation.
Thanks to its computer-optimised fit, the conversion provides a usable load volume of 7.7 - 9.7 m³ with unobstructed clearance between the wheel arches, suitable for loading Euro pallets.
Variants and load compartment data
L2H2 (7.7m3)
front-wheel drive, 2800mm
| Wheelbase | 3450 mm |
|---|---|
| Load compartment length | 2800 mm |
| Width between wheel arches | 1260 mm |
| Upper width | 1620 mm |
| Interior height | 1690 mm |
| Evaporator height | 100 mm |
| Load volume | 7,7 m³ |
| Euro pallets | 3-4 |
| Compatible refrigeration units | CoolJet C206RA |
L3H2 (9.7m3)
front-wheel drive, 3390mm
| Wheelbase | 4035 mm |
|---|---|
| Load compartment length | 3390 mm |
| Width between wheel arches | 1260 mm |
| Upper width | 1620 mm |
| Interior height | 1690 mm |
| Evaporator height | 100 mm |
| Load volume | 9,7 m³ |
| Euro pallets | 4-5 |
| Compatible refrigeration units | CoolJet C206RA |
Refrigeration technology
Temperature range: on request
CoolJet C206RA
Roof-mounted · Stationary refrigeration: optional
Application: chilled goods transport
Type: roof-mounted unit
Refrigeration capacity: max. 3157W at 0°C
Operating voltage: 12 V
Max. current draw: 24 A
Airflow: 1120 m³/h
Refrigerant: R134a
Installation height: +250mm
Standard equipment
- Kerstner easyfit insulation (K coefficient =0.37)
- Belt-driven refrigeration system for refrigeration while driving
- PU floor with water-retaining sill at the sliding door and 2 water drains
- Aluminium impact protection (approx. 20 cm high) on the left, right (except sliding door) and front wall
- Horizontal half-round lashing rails above the wheel arches on the left and right
- LED interior light + emergency release
Vehicle codes
Required codes6 items
- PX05 – Full bulkhead without window – Standard
- JI01 – Converter package (alternator 220A, battery 105Ah)
- LL01/LL02 – Double rear doors without rear windows, with 260° hinges – Standard
- Right sliding door, solid panel without window – Standard
- WM06 – Double passenger bench seat – Standard
- – – Power take-off for C206RA/RC
Excluded codes5 items
- GB33/GB34/GB35 – Load floor/side linings
- JO01 – Overhead storage above windscreen
- PC12/PC13 – Left sliding door
- – – Start-stop function (or deactivation with JI01)
- Construction site packages/cargo packages
Equipment and accessories
Required accessories
TÜV assessment / Stage II certificate of conformity (COC)
Required accessories · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Required for submission at registration
Quantity: default 1, minimum 1 units
Optional accessories
Aluminium floor panel L2
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Aluminium floor panel L3
Optional · Suitable for: L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Non-slip load floor mat L2
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Non-slip load floor mat L3
Optional · Suitable for: L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Non-slip mat for shelf
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Shelf set I (1 shelf)
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Shelf set II (2 shelves one above the other)
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
PVC strip curtain for the rear opening
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
PVC strip curtain for the sliding door
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Additional horizontal lashing rails on the left and right L2
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Additional horizontal lashing rails on the left and right L3
Optional · Suitable for: L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Front-wall lashing rail
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
ATP certificate FRAX
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Telescopic load restraint bar, 1 piece
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Transsafe load restraint bar
Universally compatible with all airline tracks
Quantity: default 1, minimum 1 units
Telescopic load restraint bar package, 2 pieces
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Transsafe load restraint bar
Universally compatible with all airline tracks
Quantity: default 1, minimum 1 units
Bär VanLift FreeAccess A2V
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Platform dimensions: 1830 mm (height) x 1330 mm*** (width)
Load capacity: 600 kg
Load centre: 600 mm
Vertically folded platform, stowed behind the left rear door
Bär SmartControl Basic handheld remote control
Includes two-part VanBridge. It provides a seamless transition between the platform and load floor via an unloaded rubber hinge. Ribbed surface for secure footing. Can be locked upright in the load compartment while driving
Includes two-part roll stops for roll containers, opening angle approx. 90 degrees
Includes foot switch unit, LED warning lights, warning flags, registration plate light and number plate lights on the platform, activation from the cab
Includes platform rear surface powder-coated in RAL 9006 White aluminium. Anodised edge profile
Includes 2-year warranty
Quantity: default 1, minimum 1 units
Emergency operation
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Detachable towball coupling complete with ball, D-value 21 kN
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Lashing strap package (2 straps)
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Quantity: default 1, minimum 1 units
Partition in load compartment for multi-compartment solution
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Increased door-closing forces: Installing a partition increases the force required to close the doors and can lead to increased sliding-door wear over time. Please also note: If a fixed multi-compartment partition without a passage is installed in the load compartment, the German employers’ liability insurance association (BG) rules require a step at the sliding door, because the partition removes access to the front compartment through the rear doors. According to the BG, the customer may not enter the front compartment without a step and may only load and unload it from outside.
Quantity: default 1, minimum 1 units
Euroscan RX3 temperature recorder with 2 sensors (available DIN slot required)
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Euroscan RT8 RX 4G LTE temperature recorder with 2 sensors (available DIN slot required)
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
DIN slot supplied by Kerstner if not fitted at the factory
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Position chosen at Kerstner’s discretion according to available cab space
Refrigeration unit cover painted in vehicle colour – solid –
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Refrigeration unit cover painted in vehicle colour – metallic –
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Stationary refrigeration 230V
Optional · Suitable for: L2H2 (7.7m3) / CoolJet C206RA; L3H2 (9.7m3) / CoolJet C206RA
Including external socket and 8m connecting cable