Data sheet
Download vehicle data as a PDF
The data sheet is generated automatically from the current information on this vehicle page.
Product data: 14.10.2026
Conversion specification
Base vehicle: panel van, rear-wheel drive, sliding door on the right, battery electric (BEV)
Delivery code: AHKA0
The Kerstner deep-freeze conversion for the Mercedes-Benz eSprinter combines top-level insulated lining performance with consistent practical suitability – developed and manufactured for daily use in the food and fresh delivery sector.
The conversion achieves a K coefficient of below 0.4 W/m²K and is classified as “heavily insulated” under ATP requirements. This is made possible by the seamless connection of all insulation elements – including at the sliding door – without gaps or thermal bridges.
The electric refrigeration unit reliably maintains the temperature range from -20 °C to +20 °C throughout the entire journey.
The polyurethane insulation components are water-repellent, antibacterial and impact-resistant, and meet the requirements of the ATP and HACCP guidelines. The easy-to-clean surface reduces the effort required to maintain hygiene in day-to-day operation.
Thanks to its computer-optimised fit, the conversion provides a usable load volume of 8.7 – 11.2 m³ with unobstructed clearance between the wheel arches, suitable for loading Euro pallets.
Variants and load space
VS30 medium high roof rear-wheel drive
Model designation 907
| Wheelbase | 3665 mm |
|---|---|
| Load compartment length | 3168 mm |
| Width between wheel arches | 1252 mm |
| Upper width | 1625 mm |
| Interior height | 1755 mm |
| Evaporator height | 100 mm |
| Load volume | 8,4 m³ |
| E2 crates | 120 |
| Euro pallets | 3 |
| Compatible refrigeration units | Thermo King E200e max 50 |
VS30 long high roof rear-wheel drive
Model designation 907
| Wheelbase | 4325 mm |
|---|---|
| Load compartment length | 4200 mm |
| Width between wheel arches | 1252 mm |
| Upper width | 1625 mm |
| Interior height | 1755 mm |
| Evaporator height | 100 mm |
| Load volume | 11,2 m³ |
| E2 crates | 156 |
| Euro pallets | 5 |
| Compatible refrigeration units | Thermo King E200e max 50 |
Refrigeration
Temperature range: on request
Thermo King E200e max 50
External · Stationary refrigeration: included
– Fully electric transport refrigeration unit for cooling and heating, 12 V
– Ultra-flat ES150 evaporator
– Split unit for roof installation
– Refrigeration while driving, 12 V; the compressor is electrically driven at 12 V DC
– Mains operation via a 230V/1PH CEE connection (L+N+PE-6h connector), cable available as an option
– In-cab remote control with digital thermometer
The remote control and temperature recorder are installed in the existing available DIN slot. Otherwise, they are installed at a location we consider suitable. Subsequent changes can be made and will be charged according to the work required.
– Automatic hot-gas defrost
– Electric thermostat
Application: chilled and frozen goods transport
Type: roof-mounted unit
Refrigeration capacity: 1050 Watt at -20°C
Operating voltage: 12 V
Max. current draw: 132A
Airflow: 1150 m³/h
Refrigerant: R452a
Installation height: +187mm
Note: – Effective refrigeration capacity at an ambient temperature of 30 °C under ATP conditions: 2000 Watt at 0 °C, 1050 Watt at -20 °C – Heating capacity: 2000 Watt at +18 °C / -18°C ambient temperature
Standard equipment
- Kerstner easyfit insulation (K coefficient <0.4)
- Refrigeration system for refrigeration while driving
- Polyester floor tray with water-retaining sill at the sliding door
- Horizontal half-round lashing rails at a height of approx. 40cm
- LED interior light
- 2x emergency release
- Aluminium impact protection (approx. 20 cm high) on the left, right (except sliding door) and front wall
Vehicle codes
Required codes14 items
- CB7/CB8 – Stabilisation stage I or stage II
- D03 – high roof
- D50 – Full bulkhead
- EK1 – Terminal strip for electrical connection
- E2C – ePTO electric power take-off 3.5 kw 12V
- P93 – Lashing eye deletion
- S23 – Two-person passenger seat
- T12 – Sliding door with hold-open device
- T16 – Right sliding door
- V93 – Wooden floor deletion – floor can be removed on request
- Z2N – N2 registration required
- FF8 – 1-DIN slot at the front below the headlining – required for temperature recorder –
- Towbar possible
- X14 – Gross weight variant 4150 kg or higher
Excluded codes3 items
- H72 – Electric roof fan II
- T55 – Electric operation for sliding door
- R87 – Spare wheel
Recommended codes1 item
- T50 – Electric closing aid for right sliding door
Equipment and accessories
Required accessories
Aluminium chequer-plate floor panel RA 3665
Required accessories · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Aluminium chequer-plate floor panel RA 4325
Required accessories · Suitable for: VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
TÜV assessment / Stage II certificate of conformity (COC)
Required accessories · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Required for submission at registration Quantity: Default 1, Minimum 1 piece
Optional accessories
Additional lashing rails at a custom height of 40-120cm RA 3665
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Lashing rail on front wall
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Non-slip load floor mat RA 3665
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Non-slip mat for shelving
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
PVC strip curtain for the rear opening
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
PVC strip curtain for the sliding door
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Shelf set I (1x shelf, 4x lashing rails)
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Shelf set II (2x shelves, 4x lashing rails, fitted one above the other)
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Additional lashing rail set for fitting shelves one behind the other
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Additional LED load compartment light
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
ATP FRC
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Additional lashing rails at a custom height of 40-120cm RA 4325
Optional · Suitable for: VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Non-slip load floor mat RA 4325
Optional · Suitable for: VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
Bär VanLift FreeAccess A2V
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Platform dimensions: 1830 mm (height) x 1330 mm*** (width) Load capacity: 600 kg Load centre: 600 mm Vertically folded platform, stowed behind the left rear door. Bär SmartControl Basic handheld remote control. Includes two-part VanBridge. It creates a seamless transition between the platform and load floor via an unloaded rubber hinge. Ribbed surface for secure footing. Can be locked upright in the load compartment while driving. Includes two-part roll stops for roll containers, opening angle approx. 90 degrees. Includes foot switch unit, LED warning lights, warning flags, registration plate light and number plate lights on the platform, activation from the cab. Includes platform rear surface powder-coated in RAL 9006 White aluminium. Anodised edge profile. Includes 2-year warranty. With a tail lift, only a roof-mounted refrigeration unit is possible! Quantity: default 1, minimum 1 piece
Emergency operation
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Detachable towball coupling complete with ball, D-value 21 kN
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Partition in load compartment for multi-compartment solution
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Increased door-closing forces: Installing a partition increases the force required to close the doors and can lead to increased sliding-door wear over time. Please also note: If a fixed multi-compartment partition without a passage is installed in the load compartment, the German employers’ liability insurance association (BG) rules require a step at the sliding door, because the partition removes access to the front compartment through the rear doors. According to the BG, the customer may not enter the front compartment without a step and may only load and unload it from outside. Quantity: Default 1, Minimum 1 piece
Mobile Storrwall partition
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
With folding panels for positioning in front of/above the wheel arches Quantity: default 1, minimum 1 piece
12 Volt axial fan, thermostat-controlled, including socket and spiral cable
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Transverse mesh shelf, 1 level, Sprinter 3665
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50
Transverse, removable mesh shelf across the full vehicle width, from the rear opening to the sliding door. It is installed at a fixed height defined by the specified height dimension. Quantity: Default 1, Minimum 1, Maximum 2 piece
Transverse mesh shelf, 1 level, Sprinter 4325
Optional · Suitable for: VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Transverse, removable mesh shelf across the full vehicle width, from the rear opening to the sliding door. It is installed at a fixed height defined by the specified height dimension. Quantity: Default 1, Minimum 1 piece
Telescopic load restraint bar, 1 piece
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Transsafe load restraint bar, universally usable in all Airline rails Quantity: Default 1, Minimum 1 piece
Telescopic load restraint bar package, 2 pieces
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Transsafe load restraint bar, universally usable in all Airline rails Quantity: Default 1, Minimum 1 piece
Lashing strap package (2 straps)
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Quantity: Default 1, Minimum 1 piece
DIN slot supplied by Kerstner if not fitted at the factory
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Position chosen at Kerstner’s discretion according to available cab space
Thermo King Touchlog Premium temperature recorder
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Blue Box Lite
Optional · Suitable for: VS30 medium high roof rear-wheel drive / Thermo King E200e max 50; VS30 long high roof rear-wheel drive / Thermo King E200e max 50
Refrigerated vans
Mercedes-Benz eSprinter as an electric refrigerated van.
The Mercedes-Benz eSprinter is a suitable platform where electric mobility, chilled goods transport and predictable urban or regional routes come together. Kerstner considers refrigeration, interior insulation, payload, charging plans and stationary periods together.