Mercedes-Benz Sprinter VS30 – Chilled goods – electric refrigeration

Brand: Mercedes-Benz
Model: Sprinter VS30 for chilled goods with electric refrigeration
Application: Chilled goods transport
Temperature range: on request

Product data: 22.09.2026

Conversion specification

Base vehicle: panel van, rear-wheel drive, sliding door on the right, internal combustion engine (ICE)

Delivery code: AHKA0

The Kerstner chilled goods conversion for the Mercedes-Benz Sprinter

RWD combines the highest insulation performance with consistent practicality –

developed and manufactured for everyday use in food and

chilled goods transport.

The conversion achieves a K coefficient of below 0.4 W/m²K and is classified

as “heavily insulated” under ATP requirements. This is made possible

by the seamless connection of all insulation elements – including at the

sliding door – without gaps or thermal bridges.

The electric refrigeration system

reliably maintains the temperature range from 0 °C to +20°C throughout

the entire journey.

Door-opening cycles according to DIN1815 (inside temperature 0°C / outside temperature 30°C):

Medium wheelbase: 6 times per hour for 1 minute or 4 times per hour for 3 minutes

Long wheelbase: 4 times per hour for 1 minute or 3 times per hour for 3 minutes

The polyurethane insulation components are water-repellent,

antibacterial and impact-resistant, and meet the requirements of the ATP

and HACCP guidelines. The easy-to-clean surface reduces the

effort required to maintain hygiene in day-to-day operation.

Thanks to its computer-optimised fit, the conversion provides a usable load volume

of 8.7 – 11.2 m³ with unobstructed clearance between the wheel arches, suitable

for loading Euro pallets.

Variants and load space

VS30 medium high roof rear-wheel drive

Model designation 90763313/90765313

Wheelbase	3665 mm
Load compartment length	3168 mm
Width between wheel arches	1252 mm
Upper width	1625 mm
Interior height	1755 mm
Evaporator height	100 mm
Load volume	8,8 m³
E2 crates	120
Euro pallets	3
Compatible refrigeration units	CoolJet C203 EA / CoolJet C206 EA / CoolJet C203 EAT

VS30 long high roof rear-wheel drive

Model designation 9076351/90765513

Wheelbase	4325 mm
Load compartment length	4200 mm
Width between wheel arches	1252 mm / 812 mm twin wheels
Upper width	1625 mm
Interior height	1755 mm
Evaporator height	100 mm
Load volume	11,2 m³
E2 crates	156
Euro pallets	5
Compatible refrigeration units	CoolJet C203 EAT

Refrigeration

Temperature range: on request

CoolJet C203 EA

Roof-mounted · Stationary refrigeration: optional

Application: chilled goods transport

Type: roof-mounted unit

Refrigeration capacity: max. 1570W at 0°C

Operating voltage: 12 V

Max. current draw: 110 A

Airflow: 1350m³/h

Refrigerant: R134a

Installation height: +220mm

CoolJet C206 EA

Underfloor · Stationary refrigeration: optional

Application: chilled goods transport

Type: underfloor unit

Refrigeration capacity: max. 1420W at 0°C

Operating voltage: 12 V

Max. current draw: 79 A

Airflow: 581m³/h

Refrigerant: R134a

Installation height: unchanged

CoolJet C203 EAT

Roof-mounted · Stationary refrigeration: optional

Application: chilled goods transport

Type: roof-mounted unit

Refrigeration capacity: max. 2300W at 0°C

Operating voltage: 12 V

Max. current draw: 140 A

Airflow: 1100m³/h

Refrigerant: R134a

Installation height: +220mm

Note: suitable only for domestic distribution within Germany

Standard equipment

Kerstner easyfit insulation (K coefficient <0.4)
Refrigeration system for refrigeration while driving
Polyester floor tray with water-retaining sill at the sliding door
Horizontal half-round lashing rails at a height of approx. 40cm
LED interior light
2x emergency release
Aluminium impact protection (approx. 20 cm high) on the left, right (except sliding door) and front wall
2 front water drains

Vehicle codes

Required codes18 items

CB7/CB8 – Stabilisation stage I or stage II
D03 – high roof
D50 – Full bulkhead
E2I – Additional battery for retrofitted electrical equipment
E36 – Split-charge relay
EK1 – Terminal strip for electrical connection
KL1 – Fuel level sender – REQUIRED for auxiliary heater –
M60/M61 – Alternator 14V / 250A or 280A
M6B – Euro 6e emissions class for unladen weight including Kerstner equipment below 2840kg
MP6 – Euro VI emissions class for unladen weight including Kerstner equipment above 2840kg
P93 – Lashing eye deletion
S23 – Two-person passenger seat
T12 – Sliding door with hold-open device
T16 – Right sliding door
V93 – Wooden floor deletion – floor can be removed on request
Z1N – N1 registration
FF8 – 1-DIN slot at the front below the headlining – REQUIRED for temperature recorder –
T57 – Electric step at right sliding door – REQUIRED for two compartments

Excluded codes4 items

H72 – Electric roof fan II
T55 – Electric operation for sliding door
RN5 – Tyres 225/65 R16C
R87 – Spare wheel – For C206EA

Recommended codes1 item

T50 – Electric closing aid for right sliding door

Equipment and accessories

Required accessories

TÜV assessment / Stage II certificate of conformity (COC)

Required accessories · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C206 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT; VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Required for submission at registration Quantity: Default 1, Minimum 1 piece

Optional accessories

EBERSPÄCHER auxiliary heater for load compartment

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C206 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT; VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Quantity: Default 1, Minimum 1 piece

Additional lashing rails at a custom height of 40-120cm RA 3665

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C206 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT

Quantity: Default 1, Minimum 1 piece

Additional lashing rails at a custom height of 40-120cm RA 4325

Optional · Suitable for: VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Quantity: Default 1, Minimum 1 piece

Lashing rail on front wall

Quantity: Default 1, Minimum 1 piece

Non-slip load floor mat RA 3665

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C206 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT

Quantity: Default 1, Minimum 1 piece

Non-slip mat for shelving

Quantity: Default 1, Minimum 1 piece

Shelf set I (1x shelf, 4x lashing rails)

Quantity: Default 1, Minimum 1 piece

Shelf set II (2x shelves, 4x lashing rails, fitted one above the other)

Quantity: Default 1, Minimum 1 piece

Additional lashing rail set for fitting shelves one behind the other

Quantity: Default 1, Minimum 1 piece

Additional LED load compartment light

Quantity: Default 1, Minimum 1 piece

Partition in load compartment for multi-compartment solution

Increased door-closing forces: Installing a partition increases the force required to close the doors and can lead to increased sliding-door wear over time. Please also note: If a fixed multi-compartment partition without a passage is installed in the load compartment, the German employers’ liability insurance association (BG) rules require a step at the sliding door, because the partition removes access to the front compartment through the rear doors. According to the BG, the customer may not enter the front compartment without a step and may only load and unload it from outside. Quantity: Default 1, Minimum 1 piece

Tubular rails with meat hanging system

Quantity: Default 1, Minimum 1 piece

ATP FRAX

Quantity: Default 1, Minimum 1 piece

Non-slip load floor mat RA 4325

Optional · Suitable for: VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Quantity: Default 1, Minimum 1 piece

Aluminium chequer-plate floor panel RA 3665

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C206 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT

Quantity: Default 1, Minimum 1 piece

Aluminium chequer-plate floor panel RA 4325

Optional · Suitable for: VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Quantity: Default 1, Minimum 1 piece

PVC strip curtain for the rear opening

Quantity: Default 1, Minimum 1 piece

PVC strip curtain for the sliding door

Quantity: Default 1, Minimum 1 piece

Surcharge for twin wheels

Width between wheel arches: 812 mm Quantity: Default 1, Minimum 1 piece

Bär VanLift FreeAccess A2V

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT; VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Platform dimensions: 1830 mm (height) x 1330 mm*** (width)

Load capacity: 600 kg

Load centre: 600 mm

Vertically folded platform, stowed behind the left rear door. Bär SmartControl Basic handheld remote control.

Includes two-part VanBridge. It creates a seamless transition between the platform and load floor via an unloaded rubber hinge. Ribbed surface for secure footing. Can be locked upright in the load compartment while driving.

Includes two-part roll stops for roll containers, opening angle approx. 90 degrees.

Includes foot switch unit, LED warning lights, warning flags, registration plate light and number plate lights on the platform, activation from the cab.

Includes platform rear surface powder-coated in RAL 9006 White aluminium. Anodised edge profile.

Includes 2-year warranty. Quantity: Default 1, Minimum 1 piece

Emergency operation

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT; VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Detachable towball coupling complete with ball, D-value 21 kN

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT; VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Telescopic load restraint bar, 1 piece

Transsafe load restraint bar, universally usable in all Airline rails Quantity: Default 1, Minimum 1 piece

Telescopic load restraint bar package, 2 pieces

Transsafe load restraint bar, universally usable in all Airline rails Quantity: Default 1, Minimum 1 piece

Lashing strap package (2 straps)

Quantity: Default 1, Minimum 1 piece

Partition in load compartment for multi-compartment solution

CJ heating option 840W for C203EA

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA

At outside temperatures below freezing, up to six door openings per hour are possible with an internal temperature setpoint of 5-10 °C

Euroscan RX3 temperature recorder with 2 sensors (available DIN slot required)

Euroscan RT8 RX 4G LTE temperature recorder with 2 sensors (available DIN slot required)

DIN slot supplied by Kerstner if not fitted at the factory

Position chosen at Kerstner’s discretion according to available cab space

Refrigeration unit cover painted in vehicle colour – solid –

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT; VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Refrigeration unit cover painted in vehicle colour – metallic –

Optional · Suitable for: VS30 medium high roof rear-wheel drive / CoolJet C203 EA; VS30 medium high roof rear-wheel drive / CoolJet C203 EAT; VS30 long high roof rear-wheel drive / CoolJet C203 EAT

Stationary refrigeration 230V

Including external socket and 8m connecting cable

Warranty extension to 3 years

Warranty extension from 24 to 36 months – according to our warranty terms –

Warranty extension to 4 years

Warranty extension from 24 to 48 months – according to our warranty terms –

Kühltransporter

Mercedes-Benz Sprinter als Kühltransporter.

Der Mercedes-Benz Sprinter ist eine bewährte Basis für größere Kühltransporter im Frischdienst und, je nach Ausführung, auch für anspruchsvollere Temperaturanforderungen. Kerstner stimmt Kühlanlage, Innenisolation und Praxisausstattung auf den täglichen Einsatz ab.

Kühltransporter einordnen Mercedes-Benz Fahrzeuge ansehen

Mercedes-Benz Sprinter VS30 – Chilled goods – electric refrigeration

Conversion specification

Variants and load space

VS30 medium high roof rear-wheel drive

VS30 long high roof rear-wheel drive

Refrigeration

CoolJet C203 EA

CoolJet C206 EA

CoolJet C203 EAT

Standard equipment

Vehicle codes

Equipment and accessories

Required accessories

TÜV assessment / Stage II certificate of conformity (COC)

Optional accessories

EBERSPÄCHER auxiliary heater for load compartment

Additional lashing rails at a custom height of 40-120cm RA 3665

Additional lashing rails at a custom height of 40-120cm RA 4325

Lashing rail on front wall

Non-slip load floor mat RA 3665

Non-slip mat for shelving

Shelf set I (1x shelf, 4x lashing rails)

Shelf set II (2x shelves, 4x lashing rails, fitted one above the other)

Additional lashing rail set for fitting shelves one behind the other

Additional LED load compartment light

Partition in load compartment for multi-compartment solution

Tubular rails with meat hanging system

ATP FRAX

Non-slip load floor mat RA 4325

Aluminium chequer-plate floor panel RA 3665

Aluminium chequer-plate floor panel RA 4325

PVC strip curtain for the rear opening

PVC strip curtain for the sliding door

Surcharge for twin wheels

Bär VanLift FreeAccess A2V

Emergency operation

Detachable towball coupling complete with ball, D-value 21 kN

Telescopic load restraint bar, 1 piece

Telescopic load restraint bar package, 2 pieces

Lashing strap package (2 straps)

Partition in load compartment for multi-compartment solution

CJ heating option 840W for C203EA

Euroscan RX3 temperature recorder with 2 sensors (available DIN slot required)

Euroscan RT8 RX 4G LTE temperature recorder with 2 sensors (available DIN slot required)

DIN slot supplied by Kerstner if not fitted at the factory

Refrigeration unit cover painted in vehicle colour – solid –

Refrigeration unit cover painted in vehicle colour – metallic –

Stationary refrigeration 230V

Warranty extension to 3 years

Warranty extension to 4 years

Mercedes-Benz Sprinter als Kühltransporter.

Ready for your next refrigeration solution?